properties steel chemical composition Photos Catalog - page 7 - WorldBid B2B Market

• 
  One Stop Purchasing Service 30x Steel Good Comprehensive Mechanical Properties

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - August 18, 2025 - 504.00 Dollar US$

  30X steel possesses excellent comprehensive mechanical properties, enabling it to operate with ease in a variety of complex working conditions. Its tensile strength is ≥885MPa and its yield strength is ≥685MPa. These two figures directly reflect its ...

• 
  High Performance Alloy 32c4 Steel Physical And Mechanical Properties

  Metals - Alloy Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - August 18, 2025 - 505.00 Dollar US$

  Alloy 32C4 steel's physical properties include density, thermal conductivity, and resistivity. Its density is approximately 7.85 g/cm³, similar to most steel materials. High thermal conductivity allows for rapid heat transfer within the material, fac...

• 
  Key Mechanical Properties Of En Nf 100cr6 Steel Quenched And Tempered Condition

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - September 29, 2025 - 152.00 Dollar US$

  Key Mechanical Properties (Annealed vs. Quenched and Tempered) EN NF 100Cr6 steel is a martensitic steel whose mechanical properties can be significantly manipulated through a "quenching and tempering" heat treatment. While the annealed state is soft...

• 
  Spring Steel Astm 6150 Pipe Mechanical Properties And Characteristics

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - October 20, 2025 - 604.00 Dollar US$

  The mechanical properties of ASTM 6150 pipe are one of the key factors that enable it to be used in the manufacture of various high-load springs. Its tensile strength σb (MPa) is not less than 1274 (130), and its yield strength σs (MPa) is not less t...

• 
  High Hardenability 20crnimo Steel Excellent Properties

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 3, 2025 - 401.00 Dollar US$

  20CrNiMo steel was originally steel grade 8620 in the American AISI and SAE standards. Its hardenability is similar to 20CrNi steel. Although the Ni content is half that of 20CrNi steel, the addition of a small amount of Mo shifts the upper part of t...

• 
  Gb 20crnimo Alloy Steel Processing And Welding Properties

  Metals - Alloy Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 3, 2025 - 403.00 Dollar US$

  Machining and Welding Properties GB 20CrNiMo alloy steel has good machinability and can be shaped using conventional machining methods such as turning, milling, and drilling. However, due to its high hardness, appropriate cutting tools and coolants m...

• 
  Key Steps To Optimize The Properties Of Isc A50202 Steel

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 3, 2025 - 406.00 Dollar US$

  Heat treatment is a crucial step in optimizing the properties of ISC A50202 steel. Common heat treatment processes include annealing, normalizing, quenching, and tempering. Annealing softens the ISC A50202 steel through heating and slow cooling, impr...

• 
  High Quality A50202 Steel Physical And Mechanical Properties

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 3, 2025 - 409.00 Dollar US$

  The physical properties of A50202 steel include density, coefficient of thermal expansion, and thermal conductivity. Its density is typically around 7.85 g/cm³, similar to many alloy steels. Its coefficient of thermal expansion and thermal conductivi...




• 
  Sncm220 Carburizing Alloy Steel Mechanical Properties

  Metals - Alloy Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 3, 2025 - 411.00 Dollar US$

  Mechanical property test data show that SNCM220 carburizing alloy steel has a tensile strength ≥1176MPa, elongation ≥9%, reduction of area ≥45%, and impact toughness ≥78J/cm². These excellent mechanical properties make it particularly suitable for wo...

• 
  Bs 805m20 Steel Mechanical And Physical Properties

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 24, 2025 - 401.00 Dollar US$

  Mechanical Properties and Physical Characteristics Mechanical Properties Strength: Tensile strength ≥980 MPa, yield strength ≥785 MPa. BS 805M20 steel exhibits significantly higher strength than ordinary carburized steel. Toughness: Elongation ≥9%, r...

• 
  Customizable A2 Tool Steel With Superior Mechanical Properties

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - January 15, 2026 - 115.00 Dollar US$

  A2 tool steel is an air-cooled medium-alloy cold work tool steel. Its core mechanical property advantage lies in its excellent wear resistance and dimensional stability while maintaining good toughness. It achieves an excellent balance between wear-r...

• 
  Microstructure Properties Astm A2 Steel Plate Quenching And Tempering

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - January 15, 2026 - 123.00 Dollar US$

  Microstructure and Properties of ASTM A2 Steel Plate After Quenching and Tempering Microstructure: Uniform tempered sorbite (ferrite matrix + fine spherical cementite), with no obvious martensite residue and extremely low internal stress. Performance...

• 
  Mechanical Properties X100crmov5 Steel Typical Applications

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - January 15, 2026 - 101.00 Dollar US$

  Typical applications of X100CrMoV5 steel: 1. Precision blanking dies and forming dies: Balancing wear resistance (edge ​​life) and chipping resistance (toughness). 2. Industrial cutting tools: Such as woodworking knives and shearing blades, requiring...

• 
  Cold Work Die Steel Din 1 2363 Material Mechanical Properties

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - February 2, 2026 - 126.00 Dollar US$

  DIN 1.2363 material, with its precise ratio of 0.35%~0.45% carbon and chromium-molybdenum-vanad ium, maintains a hardness of 48-52 HRC even at 500℃, making it the preferred material for die-casting molds and hot forging dies, improving thermal fatigu...

• 
  Gb Cr5mo1v Mold Steel High Wear Resistant Core Material Properties

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - February 2, 2026 - 104.00 Dollar US$

  Key Material Characteristics of GB Cr5Mo1V Mold Steel for High-Abrasion Cold Working: 1. Ultra-High Wear Resistance and Scratch Resistance: - High carbon (≈1.90%) and high chromium (≈12.0%) content forms a large amount of hard, wear-resistant carbide...

• 
  Key Properties And Heat Treatment Astm A2 Steel Pipe Material Used In Cold Work Dies

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - February 26, 2026 - 200.00 Dollar US$

  ASTM A2 Steel Pipe Key Performance and Heat Treatment 1. Heat Treatment Process Annealing: Hold at 850–870℃, furnace cool to below 600℃, then air cool; hardness ≤229 HB; Preheating: Two-stage preheating at 650℃ and 850℃; Quenching: Hold at 950–980℃, ...




• 
  Core Properties Of Air Cooled Hardened Material Din 1 2363 Tool Steel

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - February 26, 2026 - 202.00 Dollar US$

  DIN 1.2363 tool steel is a versatile cold work die steel that air-hardens, exhibits minimal deformation, high toughness, and high wear resistance. It is suitable for all precision stamping, cold forging, shearing, measuring tools, and long-life wear-...

• 
  Supply Ba2 Steel With Air Cooled Hardening Properties

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - February 27, 2026 - 205.00 Dollar US$

  BA2 Steel (A2) Air-Cooling Hardening Properties (Key Points) 1. Can be hardened by air cooling, no oil, water, or quenching fluid required. This is the core characteristic of BA2: - Quenching temperature: 940–980℃ - Cooling method: Static air cooling...

• 
  Aisi D2 Tool Steel Mechanical Properties Characteristics

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - March 9, 2026 - 96.00 Dollar US$

  AISI D2 tool steel is a high-carbon, high-chromium cold work die steel. Its core mechanical properties are extremely high wear resistance, high hardness, and moderate toughness. Core Mechanical Performance Parameters The mechanical properties of AISI...

• 
  Factory Manufacturing Provided Jis Skd2 Tool Steel Mechanical Properties

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - May 11, 2026 - 107.00 Dollar US$

  JIS SKD2 tool steel is renowned for its exceptional dimensional stability and outstanding durability. This material retains its original shape and dimensions across a wide range of complex environments, resisting significant deformation or degradatio...