1000 heat treatment kiln Photos Catalog - page 13 - WorldBid B2B Market

• 
  Uns G43400 Steel The Influence Of Alloying Elements On Heat Treatment

  Metals - Alloy Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - July 20, 2025 - 703.00 Dollar US$

  Effect of alloying elements on heat treatment of UNS G43400 steel 1. Effect on austenitization - Most alloying elements (except nickel and cobalt) slow down the austenitization process. Therefore, UNS G43400 steel requires higher heating temperature ...

• 
  Astm 5120 Steel Small Heat Treatment Deformation

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - July 21, 2025 - 692.00 Dollar US$

  ASTM 5120 steel is an alloy steel with good mechanical properties and wear resistance. Although some deformation may occur during heat treatment, it can be minimized through proper process and control. Here are some suggestions to reduce the deformat...

• 
  Isc A20302 Plate Heat Treatment Hardness And Wear Resistance

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - August 6, 2025 - 302.00 Dollar US$

  ISC A20302 Plate is a Japanese Industrial Standard (JIS) steel plate material and is a carbon structural steel. The following information describes the heat treatment hardness and wear resistance of this material: ## Heat Treatment Hardness 1. Anneal...

• 
  Heat Treatment Optimization Scr430 Steel Sheet Application Areas

  Metal Manufacturing - Dongguan Songshun Mould Steel Co., Ltd. - China - August 18, 2025 - 522.00 Dollar US$

  SCr430 steel sheet is a low-alloy structural steel sheet. Characteristics - Excellent Wear Resistance: The addition of chromium enhances the steel's hardenability and wear resistance, making it outstanding in abrasive environments and suitable for ma...

• 
  Hardness Of Scr440h Steel After Heat Treatment

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - August 27, 2025 - 404.00 Dollar US$

  After heat treatment, SCr440H steel typically achieves a hardness between HRC 28 and HRC 36. The specific hardness depends on heat treatment parameters, such as quenching temperature, tempering temperature, and holding time. With proper heat treatmen...

• 
  Optimized Heat Treatment Process For Aisi 5140 Steel Pipes Advantages

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - August 28, 2025 - 447.00 Dollar US$

  AISI 5140 steel pipes are a medium-carbon alloy structural steel with high strength, good toughness, and wear resistance. They are widely used in the manufacture of mechanical components subject to moderate loads and speeds. Advantages High Strength ...

• 
  Bearing Material Gost ЩХ15 Steel Strict Heat Treatment Process

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - September 29, 2025 - 150.00 Dollar US$

  GOST ЩX15 steel is a high-carbon chromium bearing steel widely used in the manufacture of rolling bearings and other high-precision mechanical parts. Its key characteristics are excellent wear resistance and high hardness, which make it excel in high...

• 
  Supply Gb 50crva Alloy Material Heat Treatment Process Specification

  Metals - Alloy Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - October 20, 2025 - 606.00 Dollar US$

  The heat treatment process for GB 50CrVA alloy material significantly impacts its performance. Its heat treatment specifications include two processes: quenching and tempering. The quenching temperature is controlled between 850°C ± 20°C, using oil c...




• 
  Metallographic Structure Of Gb 50crva Steels After Heat Treatment

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - October 20, 2025 - 607.00 Dollar US$

  GB 50CrVA steels, a high-performance alloy steel, are widely used in the manufacture of various high-load springs. Its unique chemical composition and heat treatment process impart excellent mechanical and process properties, making it a preferred ma...

• 
  Small Heat Treatment Deformation G61500 Spring Steel Quenching Process

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - October 20, 2025 - 617.00 Dollar US$

  The heat treatment process for G61500 spring steel has a crucial impact on its performance. Quenching is generally performed at a temperature of 850°C ± 20°C, using oil cooling. Quenching at this temperature allows the austenite in the steel to fully...

• 
  Optimization Of Heat Treatment Gost 50ХФА Material Performance Regulation

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 3, 2025 - 516.00 Dollar US$

  The Intrinsic Logic of Composition Content and Performance Improvement Synergistic Hardenability of Carbon-Chromium-Molybdenu m On the one hand, carbon forms martensite or bainite structures during quenching, significantly increasing hardness. On the...

• 
  High Quality 735a50 Steel Heat Treatment Process

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 3, 2025 - 518.00 Dollar US$

  Heat treatment is crucial for maximizing the performance of 735A50 steel and requires process adjustments based on the application: Annealing: Slow cooling at 720–750℃, achieving a hardness ≤220 HBW and optimizing the machinability of 735A50 steel. Q...

• 
  Standard Cns Sncm220 Steel Heat Treatment Process

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 3, 2025 - 406.00 Dollar US$

  CNS SNCM220 steel contains various alloying elements such as carbon, chromium, nickel, and molybdenum in its chemical composition. After carburizing heat treatment, this material forms a high-hardness, wear-resistant layer on the surface (tensile str...

• 
  Heat Treatment Gost 20ХНМ Materials Normalizing Process

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 23, 2025 - 403.00 Dollar US$

  Normalizing: Normalizing is a heat treatment process in which GOST 20KMN materials are heated to approximately 910℃ and then air-cooled. Normalizing improves the machinability of the material and can also be used as a pretreatment before carburizing....

• 
  En Bs 805m20 Steel Heat Treatment Process And Performance Control

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 24, 2025 - 409.00 Dollar US$

  EN BS 805M20 steel achieves precise performance control through heat treatment processes: Carburizing: The carburized layer depth of EN BS 805M20 steel is typically 0.8-1.2 mm, with optimized carbon concentration gradients to balance wear resistance ...

• 
  T20503 Steel Heat Treatment Technology And Processes

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - December 23, 2025 - 517.00 Dollar US$

  T20503 steel, also known as Cr5Mo1V cold work die steel (equivalent to A2), typically undergoes the following heat treatment process: post-forging annealing → machining → two preheating cycles → high-temperature quenching (air cooling or oil cooling)...




• 
  Gb Cr5mo1v Sheet Heat Treatment Process

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - January 15, 2026 - 121.00 Dollar US$

  The heat treatment process for GB Cr5Mo1V sheet is a complex and crucial procedure that directly impacts the material's properties and service life. 1. Preheating Stage: In the initial stage of heat treatment, the steel sheet is typically heated slow...

• 
  Detailed Explanation Of Heat Treatment Process For Air Hardening 1 2363 Steel

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - February 2, 2026 - 124.00 Dollar US$

  1.2363 steel (X100CrMoV5-1/AISI A2) is renowned for its perfect balance of high hardenability, wear resistance, and toughness. After heat treatment, its hardness reaches 58~63 HRC, and its impact resistance is more than 30% higher than high-chromium ...

• 
  En Nf X100crmov5 Steel Processing And Heat Treatment

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - February 2, 2026 - 101.00 Dollar US$

  Machining and Heat Treatment When machining EN NF X100CrMoV5 steel, the high hardness and wear resistance may pose significant cutting challenges. Therefore, selecting appropriate tool materials and cutting parameters is crucial. Simultaneously, the ...

• 
  Jis Skd12 Material Heat Treatment Guidelines For Optimizing Abrasion Resistance

  Metals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - February 2, 2026 - 104.00 Dollar US$

  Heat Treatment Guidelines for Achieving Optimal Wear Resistance To maximize the high wear resistance of JIS SKD12 material during cold working, strict heat treatment is required: Preheating: 600–650°C + 800–850°C (reduces thermal stress and prevents ...