3 Russia 
2 China 
2 India 
1 Germany 
1 Singapore 
1 Brazil 
1 Canada 
1 Nigeria 
inspection pre shipment factory audit lab testing Photos Catalog - page 85 - WorldBid B2B Market
-
Bag Lifting Fatigue Testing MachineEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 28, 2025 - contact company for priceProduct Introduction: This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven bag and other bags bearing a certain weight. After many fatigue tests, the strength of the bag can be d...
-
Plastic Pipe Hydrostatic Pressure Burst Testing MachineEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 28, 2025 - contact company for priceStandard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of plastic pipe under constant internal pressure. ASTM D 1599: Standard test method for resistance to short-tim...
-
Thermal Cold Cycle Testing MachineEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 28, 2025 - contact company for priceStandard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification: Configurable to meet ISO, ASTM, and EN standards upon request. Product Advantages 1. Forward-Thinking Tec...
-
Thrust Bearing Rolling Friction And Wear Testing MachineEquipment - Standard International Group (HK) Limited - China - October 28, 2025 - contact company for priceApplicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates Real-World Conditions: Allows testing under controlled load, speed, temperature, and lubrication conditions relevant to actual thrust bearing operation. Quanti...
-
Abrasive Wear Testing MachineEquipment - Standard International Group (HK) Limited - China - October 28, 2025 - contact company for priceStandard ASTM G65 - 04 GB/T 3960-1983 Main Purposes The wet - type rubber wheel abrasive wear testing machine is primarily employed to assess the wear - resistance of metal materials when they are in frictional contact with solids like sand, ores, an...
-
Full Notch Creep Testing MachineEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 28, 2025 - contact company for priceStandard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable for tensile, compressive, and flexural creep testing of polymers and composites. ISO899 ISO3501 Product Ad...
-
Whole Shoe Breathability And Heat Preservation Testing MachineEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 28, 2025 - contact company for priceStandard SATRA TM376: Thermal insulation testing of footwear with sock integration. SATRA TM386: Water vapor permeability assessment for athletic and outdoor footwear. SATRA TM436: Comprehensive sweat management evaluation for industrial safety shoes...
-
Shoe Shank Stiffness Testing MachineEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 28, 2025 - contact company for priceStandard SATRA TM256: Flexural and torsional stiffness testing for athletic, safety, and casual footwear. SATRA TM194: Dynamic fatigue resistance evaluation for shoe midsole and outsole integrity. Product Features Dynamic Testing System: Servo-electr...
-
Shoe Heat Insulation Testing Machine Sand BathEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 28, 2025 - contact company for priceStandard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated hot surface exposure. EN ISO 20344: European standard for personal protective equipment (PPE) footwear thermal resistance testing. Product Features Sand Bath Syst...
-
Spectro Photometer Testing Machine Iso 7724 1Equipment - Standard Group (Hong Kong) Co., Ltd. - China - October 28, 2025 - contact company for priceProduct Advantages 1. Dual-Mode Precision CMOS Dual-Path Sensor: Simultaneous SCI/SCE measurement with 0.04 ΔE*ab repeatability. 10nm Optical Resolution: Covers 400–700nm spectrum for fluorescent material analysis. 2. Ergonomic Excellence 410g Ultra-...
-
Coating Thickness Testing MachineEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 29, 2025 - contact company for priceStandard Coating Thickness Gauge complies with international standards including ASTM B499. ASTM D1400. ISO 2178. ISO 2360. and GB/T 4956. ensuring reliable measurements for industrial and laboratory applications. Designed for non-destructive testing...
-
Scratch Resistance Testing MachineEquipment - Testing / Measuring - Standard International Group (HK) Limited - China - October 30, 2025 - check with company for priceProduct Introduction: Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface of automobile wires to determine the wear resistance of automobile wires Applicable standards: JB/T 8139-1...
-
Aircraft Wire Wear Testing MachineEquipment - Testing / Measuring - Standard International Group (HK) Limited - China - October 30, 2025 - check with company for priceApplicable standards: GJB17.9. MIL-W-81381A, MIL-T-5438 and ISO R1220. 1491 and other standards Main parameters: 1. sand belt length counting range :0——9999.9mm 2. sand belt walking speed :1500 mm/min 3. grinding belt support rounded :F: 0.8/1.6/4.8m...
-
Electric Rolling Wheel Peeling Testing MachineEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 30, 2025 - contact company for priceIntroduction Electronic pressure roller testing machine (automatic pressure roller machine) specializing in intaglio printing process for the production of plastic film and cellophane decorative prints (including composite film prints) for the printi...
-
Sauce Packet Pressure Testing InstrumentEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 30, 2025 - contact company for priceThe pressure resistance tester for sauce packets is a device specifically designed to test the pressure - resistance performance of soft packaging materials such as sauce packets. The following is a detailed description of its main uses, compliance s...
-
Mattress Durability Fatigue Testing MachineEquipment - Standard International Group (HK) Limited - China - October 30, 2025 - contact company for priceProduct Description Mattress durability testing machine. This test is mainly used to evaluate the resistance to fatigue pressure and surface wear of the springs, foam and other elastomers in mattresses, seats, sofas, etc. after a certain number of re...
-
Salt Spray Testing MachineEquipment - Standard International Group (HK) Limited - China - October 30, 2025 - contact company for priceMeet the standard: GB/T2423.17 Product Introduction: This type of salt spray test chamber is one of the artificial climate environmental “three antis” (damp heat, salt spray, mold) testing equipments and an important testing equipment for researching...
-
E Bike Chassis Dynamometer Testing MachineEquipment - Standard International Group (HK) Limited - China - October 30, 2025 - contact company for priceMeet the standard: EN 15194 ISO 4210 UL 2849 Product Introduction: Electric bicycles are complex systems involving mechanical, electrical, and control components. Evaluating their performance and compliance with safety and efficiency standards requir...
-
Electric Bicycle Lighting Device Testing MachineEquipment - Standard International Group (HK) Limited - China - October 30, 2025 - contact company for priceMeet the standard: EN 15194 ISO 4210 UL 2849 ECE R50 StVZO Scope of application: Public, inspection, law, accident investigation, fire emergency lighting, railway, power emergency repair lighting and various outdoor construction operations, The need ...
-
Steel Wheel Wear Testing MachineEquipment - Standard International Group (HK) Limited - China - October 30, 2025 - contact company for priceMeet the standard: GB/T3810.7-2016 "Wear resistance test method for unglazed brick" ISO/DIS10545/6-94 "Unglazed brick resistance to deep wear test method" GB/T12988-1009 "Inorganic floor material resistance test method" EN 932-5 ISO 565, 3310-1, 3310...